- TOSIZE.pl
- Do it yourself
- DIY Projects
Custom cabinet / bar & room divider, by Paul
Create this project yourself with sheet material cut to size by TOSIZE.pl!
Paul
Average
2 minutes
Description
Because we have a fairly long empty wall in the living room, I was looking for a nice slim and open cupboard. I couldn't find anything anywhere, so I made a custom cabinet. The large open surfaces ensure that the children can easily reach them, there is space for them on the bottom 2 parts. The 3rd part is a small bar and above it there is room for books.
Work description: how did you realize your project
On the left I have made a recess in the large outer plates for the plinth & some extra space for the power cable that is incorporated in the cabinet. The size of the 4 side plates is 40.0 × 240.0 cm. All plates have a recess for the plinth, only the leftmost one, so an extra recess for the power cable. The plates are finished on the long side with an angle of 45 degrees. I glued a cover plate against this with wood glue. Then I used 6 sheets with 45 degrees sawn long sides to stick a slat against for a seamless finish. In between I stuck blocks of raw mdf in order to drill through the long plank directly into the floating planks. For the bar area, I used a 111.0 × 52.0 cm shelf. Here I finally sawed out a piece of 5.5 × 40 cm from both sides to make it fit.
Final size: What are the outer dimensions?
111,0 × 40,0 × 240,0 cm
Tip! Also check out our handy DIY tips!
What now?
Want to make this DIY project? Check out Paul's saw list and complete your order easily.
3401,92 zł
View all sheet materials